Free Example Programs
for Philips 8051 and XA
Microcontroller Derivatives
Download example programs that use peripherals such as Timer, A/D converter, UART, I2C (Inter-Integrated Circuit bus) and CAN (Controller Area Network)
Other utilities and programs such as a Flash programmer and a CANopen configuration tool can be found at: www.esacademy.com/software |
Example programs for Flash Memory programming
The "flash" directory
Contains Flash example programs for the Philips Rx2 derivatives. These programs were tested on the PHYTEC Rapid Development Kits.
Example programs for generic I/O and LCD
The "phycore" directory
Contains example programs for the PHYTEC phcCORE boards based on Philips 8051 or Philips XA microcontrollers. Inlcudes I/O routines for LCD displays.
Example programs for memory testing
The "ram" directory
These programs were published in the article "Software-based Memory Testing" by Michael Barr.
Contains example programs for the 8051 and Philips XA derivatives. These programs were tested on the PHYTEC Rapid Development Kits.
Example programs for CAN - Controller Area Network
The "can" directory
Contains CAN example programs for the Philips 8xC591 and Philips XA-C3. These programs were tested on the PHYTEC Rapid Development Kits.
Example programs for I2C - Inter-Integrated Circuit
The "i2c" directory
Contains I2C example programs for the Philips 8xC591 and Philips 8xC554. These programs were tested on the PHYTEC Rapid Development Kits.
Example programs for Philips XA
The "xa-generic" directory
Contains generic example programs for the Philips XA. These programs were tested on the PHYTEC Rapid Development Kits.
ALL PROGRAMS ARE COPYRIGHT BY EMBEDDED SYSTEMS ACADEMY, INC. Re-publishing these example programs in printed or digital form, such as on web sites, CD-ROMs or any other media requires the written authorization of the Embedded Systems Academy, Inc. Acceptable usage: downloading and using the example programs for educational purposes is generally accepted. |
© ESAcademy, 2000
All materials
provided 'as is'
see Disclaimer