Back to ESAcademy Home Page

Microcontroller
Peripheral Timing
Calculator

Philips 8xC591 - CAN baud rates

  

Home

News

Training Classes

Products

Consulting

Technical Library

Contact Us

Recommended books:

CAN System Engineering

CANopen

The 8051 Microcontroller

The following additional calculators are available for the settings of the acceptance filters:

For bus timing calculations, enter your external clock rate and the desired baud rate,
then click on the "Calculate" button

Clock frequency (in MHz): (mhz)
Desired baud rate (in kBit): (kbps)

NOTE:
CiA recommended baud rates: 10-500kBit, 800kBit or 1MBit.

CiA recommended values for entered baud rate

Description Values
Bit time (length of one bit)
(microseconds)
Number of TQ per bit
Length of TQ
(microseconds)
Sample point
Synchronization Jumpwidth
(number of TQ for sync)

The following values will only be calculated, if you entered a CiA recommended baud rate!

Register Desired Value Available Value Variance
Length of TQ
(microseconds)
(CiA)
tqa=(brpa+1)/mhz
=(tqa-tq)/tqa
Baud Rate Prescaler: BRP
brpd=mhz*tq
brpa=Round(brpd)		  
Number of TQ in TSEG1  
(CiA)		  
Number of TQ in TSEG2  
(CiA)		  
BTR0
(Sync Jump Width, BRP)		  
btr0=64+brpa-1		  
BTR1
(TSEG2, TSEG1)		  
btr1=(tseg2-1)<<4
+(tseg1-1)		  

NOTES:
1.) Total number of TQ = 1 + tseg1 + tseg2
2.) Register value of brp, tseg1 and tseg2 = desired value - 1

Non CiA dependent values

The following values are calculated independently from the CiA recommended values above. These are not complete and can only give you an overview of possible settings.

Baud Rate Prescaler: BRP
(only first 8 values)

Length of TQ
(microseconds)

kBit Rate
(with 8 TQ,
75% SP)

kBit Rate
(with 10 TQ,
80% SP)

kBit Rate
(with 16 TQ,
87.5% SP)
1
2
3
4
5
6
7
8
Upcoming Classes
   

© ESAcademy, 2000
Author: Olaf Pfeiffer

All materials
provided 'as is'
see Disclaimer

www.esacademy.com
info@esacademy.com