Embedded Networking with CANopen
A 2-day hands-on training class about CANopen, the higher-layer CAN bus protocol best suited for embedded systems
The hands-on part implements several examples for 8051 microcontrollers and uses several Vector tools for implementation, monitoring and stimulation
This 2-day class gives engineers a fast hands-on introduction into CANopen. As preparation for this class it is recommended to participate in our CAN class.
Agenda
Time |
Day 1 |
Day 2 |
| 08:00AM - 08:30AM | Registration, Welcome | Welcome |
| 08:30AM - 10:00AM | Objectives for the 2
days Introduction to embedded networking in layman terms Summary of CAN features |
Lesson: Summary of
previous day Lesson: Implementation options and tips |
| 10:00AM - 10:15AM | Break | Break |
| 10:15AM - 12:00PM | Lesson: Introduction to
CANopen
|
CANopen Configuration
Exercises: Hands-on: Real-world example network configuration and exercises using traditional tools (pen & paper) |
| 12:00PM - 01:00PM | Lunch | Lunch |
| 01:00PM - 02:45PM | Lesson: The generic I/O
device profile Live demo: CANopen configuration examples Lesson & hands-on: Introduction to the tools provided |
CANopen Configuration
Exercises: Hands-on: Real-world example network configuration and exercises using advanced Vector tools: CANoe, proCANopen and CANsetter |
| 02:45PM - 03:00PM | Break | Break |
| 03:00PM - 04:30PM | Lesson & hands-on:
CANopen message details Lesson & hands-on: Generating Electronic Data Sheets (EDS) |
Implementing CANopen
Salves: Tips & tricks and examples for configuring the Vector CANopen source code |
| 04:30PM - 05:00PM | Summary and outlook Questions and answers |
Summary Questions and answers |
| Upcoming Classes |
Prerequisites
Good knowledge about the design and implementation of embedded systems is beneficial. General CAN knowledge is required for this class. As preparation for this class it is recommended to participate in our CAN class.
Hands-On Part
For the hands-on part, we provide computers with all the required software, the Vector CANoe, proCANopen, CANsetter, CANeds and a microcontroller starter kit with an 8051 derivative.
We recommend that two students share one computer, because that maximizes class efficiency as typographical errors and other simple mistakes are less likely to happen in a team environment.
Certification
Certificates are issued to all students participating in the training class.
Schedule, Location, Pricing
This class is currently not scheduled.
The price for the 2-day hands-on training class is $1,195 per
student.
Food and drinks are included.
The total number of students is limited to 12, to achieve a good learning environment.
So register today, send an email to sales@esacademy.com or call us at (877) 812-6393.
Alternatively you can register online and we will contact you after registering regarding payment options.
Cancellation Policy
Cancellations must be made 2 weeks prior to the event, otherwise tuition is non-refundable. A 15% rescheduling fee applies, if student needs to reschedule within 2 weeks prior to the event.
San Jose, CA
Tel. (877) 812-6393
Fax. (877) 812-6382