With about 900 exhibitors the Embedded World reached a size where it is impossible to “see it all”. Yes, you can still walk by all booths in a day, but you might easily miss hidden highlights. It was quite obvious that IoT – the Internet of Things – is a current hype. To me this is quite astonishing as already some 10+ years ago we built an “Embedded Internet Demo” – at that time based on a Philips 8051 with a dial-up modem connected. The main difference between now and then is that now smart phones are widely spread and we are “always online” and now can access our embedded devices “at any time”. Among the visitors one could recognize a lot of skepticism for what exactly we really need the IoT, other then it being hip and cool to be able to control “everything” with our smart phone.
An unusual approach to get remote access to embedded applications was shown by Raisonance (http://www.iotize.com) – they have a miniature NFC or Bluetooth module that connect to the JTAG/SWD debug port of an application. So it can be added to any application with debug port, sometimes even without the need to re-compile the code, if you have the knowledge where in memory the variables are that you want to have remote access to. A great tool to get started with IoT without requiring a re-design of existing hardware.
At the CiA (CAN in Automation) booth a CAN FD demo integrated devices and tools from multiple vendors. CAN FD (Flexible Data) allows higher bit rates and longer contents (up to 64 bytes) of the data frame. Especially bootloader applications and other software update features benefit from the higher data throughput. For such applications it seems to be possible to increase the effective data throughout 8 fold easily, potentially even more.
We at ESAcademy further enhanced our portfolio of CANopen Diag products. There is now a second hardware, based on PEAK’s mini Display, that offers a subset of the diagnostic features provided at a price point of well below 1000 Euro. The CANopen Test Machine System part of the CANopen Diag now allows to create tests based on MS Visio graphs. The transitions in a state diagram can be used to transmit or receive a CAN/CANopen message or to influence/set/test/query variables or timers. More details and examples will be published shortly.